1.帘线输水胶管
用途:
供采矿、工厂、农林、土木建筑工程常温下输送水及一般中性液体。
特点:
胶管管体轻便,具有良好的柔软性和耐老化性能,胶管的爆破压力不低于
工作压力的三倍。
1.Cord Water Transprtation Rubber Hose
Applicability:Apply to transport water and some neutral liquid in mining,factories,farming,civil
engineering etc.
Character:The body is hard,light and convenient with excellent flexibility and anti aging.The burstre
pressure is at least three times of the working pressure.
2.吸水管
用途:
供工矿、土建及水利工程等吸引常温水及一般中性液体。
特点:
胶管管体有优良的曲挠性,管体坚固,在承受真空度-80KPa(600mm汞柱)的条件下使用时胶管仍
有良好的性能。
2.Water Suction Rubber Hose
Applicability:Apply to suck water and some neutral liquid in mining,civil engineering and water
conservancy projrct etc.
Character:The body is good in flexibility and can perform well under -80KPa(600mm mercury) in a
vacuum.
3.排吸水胶管
用途:
供工矿、工厂、城建及水利工程等吸引或排送常温水及一般中性液体。
特点:
胶管具有承受正压或负压的双重性能,适于较复杂环境条件下使用。
3.Water Discharge and Suction Rubber Hose
Applicability:Apply to discharge and suck water and some neutral liquid in mining,factories urban
construction and water conservancy project etc.
Character:The hose is suitable for more complex conditions with double properties of bearing positive
and negative pressure.
4.高压吸水胶管
用途:
适合基础工程大扬程水泵排水用。
特点:
胶管承压高,变形小,具有很高的抗拉强度,胶层抗撕裂,耐磨耗,耐老化,性能优良。胶管的爆破
压力不低于工作压力的三倍。
4.High Pressure Water Suction Hose
Applicability:Apply to discharge water for the long distant water pump in foundation engineering.
Character:The hose can bear high pressure with excellent properties of high tensile strength,anti aging
and wear proof.The burst pressure is at least three times of the working pressure.
1、帘线输水胶管主要参数
| 
				内径 in.mm I.D  | 
			
				工作压力 Mpa(psi) W.P  | 
			
				基本长度 Basic Length  | 
			
				最大长度 Max Length  | 
		|||
| 
				公称尺寸 Size  | 
			
				公差 Tolerance  | 
			Mpa | Kgf/cm2 | m | 
				公差 mm Tolerance  | 
			m | 
| 13 | ±0.8 | 0.7 | 7 | 20 | ±200 | 200 | 
| 16 | ±0.8 | 0.7 | 7 | 20 | ±200 | 200 | 
| 19 | ±0.8 | 0.7 | 7 | 20 | ±200 | 200 | 
| 22 | ±0.8 | 0.7 | 7 | 20 | ±200 | 200 | 
| 25 | ±0.8 | 0.7 | 7 | 20 | ±200 | 200 | 
| 32 | ±1.2 | 0.7 | 7 | 20 | ±200 | 200 | 
| 38 | ±1.2 | 0.7 | 7 | 20 | ±200 | 200 | 
| 45 | ±1.2 | 0.7 | 7 | 20 | ±200 | 200 | 
| 51 | ±1.2 | 0.7 | 7 | 20 | ±200 | 200 | 
| 64 | ±1.5 | 0.7 | 7 | 20 | ±200 | 200 | 
| 76 | ±1.5 | 0.7 | 7 | 20 | ±200 | 200 | 
| 89 | ±1.5 | 0.7 | 7 | 20 | ±200 | 200 | 
| 102 | ±2.0 | 0.7 | 7 | 20 | ±200 | 200 | 
| 127 | ±2.0 | 0.7 | 7 | 10 | ±120 | 10 | 
| 152 | ±2.0 | 0.7 | 7 | 10 | ±120 | 10 | 
2、吸水胶管主要参数
| 
				内径 in.mm I.D  | 
			
				基本长度 Basic Length  | 
		||
| 
				公称尺寸 Size  | 
			
				公差 Tolerance  | 
			m | 
				公差 mm Tolerance  | 
		
| 25 | ±0.8 | 20 | ±120 | 
| 32 | ±1.2 | 20 | ±120 | 
| 38 | ±1.2 | 20 | ±120 | 
| 45 | ±1.2 | 20 | ±120 | 
| 51 | ±1.2 | 20 | ±120 | 
| 64 | ±1.5 | 20 | ±120 | 
| 76 | ±1.5 | 20 | ±120 | 
| 89 | ±1.5 | 20 | ±120 | 
| 102 | ±1.5 | 20 | ±120 | 
| 127 | ±2.0 | 10 | ±120 | 
| 152 | ±2.0 | 10 | ±120 | 
| 203 | ±2.5 | 10 | ±120 | 
| 254 | ±2.5 | 10 | ±120 | 
| 305 | ±3.0 | 10 | ±120 | 
| 357 | ±3.0 | 10 | ±120 | 
3、排吸水胶管主要参数
| 
				内径 in.mm I.D  | 
			
				工作压力 Mpa(psi) W.P  | 
			
				基本长度 Basic Length  | 
		|||
| 
				公称尺寸 Size  | 
			
				公差 Tolerance  | 
			Mpa | Kgf/cm2 | m | 
				公差 mm Tolerance  | 
		
| 51 | ±1.2 | 0.6 | 6 | 20 | ±120 | 
| 64 | ±1.5 | 0.6 | 6 | 20 | ±120 | 
| 76 | ±1.5 | 0.6 | 6 | 20 | ±120 | 
| 89 | ±1.5 | 0.6 | 6 | 20 | ±120 | 
| 102 | ±2.0 | 0.6 | 6 | 20 | ±120 | 
| 127 | ±2.0 | 0.6 | 6 | 10 | ±120 | 
| 152 | ±2.0 | 0.6 | 6 | 10 | ±120 | 
| 203 | ±2.5 | 0.6 | 6 | 10 | ±120 | 
| 254 | ±2.5 | 0.6 | 6 | 10 | ±120 | 
4、高压吸水胶管主要参数
| 
				内径 in.mm I.D  | 
			
				工作压力 Mpa(psi) W.P  | 
			
				基本长度 Basic Length  | 
		|||
| 
				公称尺寸 Size  | 
			
				公差 Tolerance  | 
			Mpa | Kgf/cm2 | m | 
				公差 mm Tolerance  | 
		
| 76 | ±1.5 | 0.9 | 9 | 20 | ±120 | 
| 89 | ±1.5 | 0.9 | 9 | 20 | ±120 | 
| 102 | ±2.0 | 0.9 | 9 | 20 | ±120 | 
| 127 | ±2.0 | 0.9 | 9 | 10 | ±120 | 
| 152 | ±2.0 | 0.9 | 9 | 10 | ±120 | 
| 203 | ±2.5 | 0.9 | 9 | 10 | ±120 |